Altec Voice Of The Theater DECAL ONE (1) label sticker VOTT for A5 A7

Description

For sale is ONE  decals made of tough, durable and best quality that will withstand rough handling, sunlight, humidity and heat and of course time.  It will last years and years without peeling, discoloration and fading.
Quantity: 1
Size: 15inx8in
These decals are perfect for your Altec speakers especially the VOTT A2, A4, A5 and so on.  These are also great for your refurbished Altec speakers.
I put four of these of my pair of A5 Altecs.  I am running them with 515B woofer, 288-16G horn, wood horns and a custom built cabinets and wood horns made of Baltic birch.  This sale is only for the decals and not my system.
INSTRUCTIONS
1  Location.  Most people place decals 6-12inch from top of the cabinet and centered sideways.  I chose 6 inches from top.
2 Measure 6-12in from top and put a masking tape horizontally
3 Measure 8inch from this line and put another masking tape horizontally
4  Measure the width of your cabinet and subtract 15inch, and divide this number by half.  My cabinet is 48 and 48-15 is 13.  Half of this is 6.5in.
5  Measure 6.5in from the left side of cabinet and draw a vertical line.
6  Measure 15in from this line and put another masking tape 15in from the first vertical line.
7  Now that you ahve a rectangle, peel the top portion of decal and carefully place of the left top corner and go across to the right following the tape.
If you mess up, lift carefully and start over.  It won't tear the decal.
JOE
GOOD LUCK!!!